Jam Filling Machine

Product Detail

Evalcan Machinery & Equipment Co.,Ltd is one of the top level China jam filling machine manufacturers and suppliers, we are always able to provide customers with cheap jam filling machine products. Welcome to buy low price products from us.

1-PVC plast sheet roll
2-Pre-heating box
3-Encoder
4-PVC forming
5-Filler
6-HMI
7-Photocell
8-Heat sealing
9-Main motor
10-Making tear line
11-Sealing film roll
12-Stepping motor drawing
13-Cutting
14-Wasted plastic collecting



Introduction of the main structure:
1-PVC plastic sheet roll
Max. outer diameter 300mm, width 200-270mm, thickness 0.15-0.35mm.
Plastic sheet shaft diameter 46mm, paper roll diameter 74mm.
Working process:
The PVC plastic sheet is controlled by the swing shaft, the swing shaft will work with PVC sheet, the proximity switch will give the signal to the PLC, and PLC control the motor to release the sheet, or stop feeding.
When the plastic sheet is used out, the machine will stop and give alarm.
2-Pre-heating box
It is used to heat the plastic sheet, to help to form the cups in the moulds.
The longer time the PVC be heated, the better performance of forming, so the pre-heating box length is set as 350mm, to ensure the PVC is enough time heated.
The temperature is controlled by HMI, temperature error range ±1?.
Heating temperature 80-180?, that is decided by the PVC thickness.
3-Encoder
The encoder is used to give the signal to PLC, it is make the impulse to PLC with the working of main shaft, the principle is: Give the compressed air when the moulds is closed, and stop the compressed air feeding when the moulds is opened.
4-PVC forming
The forming is used blow forming system, and driven by cam with the main shaft, the position can be adjusted by handle wheel.
The heated PVC will be formed in the Alloy moulds, using compressed air.
5-Filler
Using pneumatic liquid piston to fill the material to the formed cups.
6-HMI
This machine is gathered most of actions control in touch screen, and controlled by PLC.
The control language is Chinese and English. With E-stop switch at side.
7-Photocell
Using photocell to position the film length and feeding, error range ±0.01mm.
8-Sealing
Heating sealing the plastic film with the cups.
9-Main motor
Using reducing motor, with self-braffle function, main power 380V/50HZ/3P/4L. Or customized.
10-Making tear line
To press a line to easy tear the sealing film.
11-Sealing film roll
Max outer diameter 250mm, width 200-270mm, thickness 0.02-0.035mm, shaft diameter 46mm. Inner roll diamter 74mm.
12-Stepping motor drawing
To feed the sealing film, controlled by HMI, can adjust the length on site.
13-Cutting
To cut the cups one by one.
14-Wasted plastic collection
To collect the wasted plastic after cutting, and tighten the belt.

Parameters:

Speed	18-28stocks/min(20stocks for honey and jam, 25-28stcks for oil)
Packing speed	220-330cups/min(with 12 stamping and filling heads) 14400cups/hour for honey and jam, 19000cups/hour for oil
Drawing stroke	20—200mm
PVC plastic sheet thickness	0.15-0.5mm
Sealing film	Roll aluminum film
PVC sheet max. Dia.	300mm
Sealing film max. dia.	250mm
Wasted plastic roll dia.	400mm
Max. Forming size	250×180×26mm(beyond this size shall be customized)
Main motor	Y90L—6  1.5Kw
Compressed air	=0.36m3/min, 0.4-0.6Mpa
Molds cooling	60L/hour, tap water or cycling water
Power	380V/50HZ/3P/4L 6.9KW
Size	3520×860×1640
Wight	1.9T